www.oniriibike.com
VCYCLE VIKING 6 Spoke Wheel Ultralight Carbon T800 Six Spoke HG Vacuum Tubeless 40mm with Hooked Edge for Road Bicycle NEW
VCYCLE VIKING 6 Spoke Wheel Ultralight Carbon T800 Six Spoke HG Vacuum Tubeless 40mm with Hooked Edge for Road Bicycle NEW
Couldn't load pickup availability
6-spoke carbon fiber wheels for road bikes
Model: Vcycle VIKING 6 Spoke
Rim height: 40mm
Hub: 36t planetary ratchet hub
Weight: (Front) 599g, (Rear) 726.8g (Weights are measured manually, slight errors are normal)
Inner and outer width: 22mm (inner width) 29mm (outer width)
Size: 700c
Material: T800 carbon fiber
Compatible Tires: Vacuum tubeless or tube
Cassette body: HG
Maximum weight: 100kg

Lightweight design
Even with the one-spoke wheel design, the weight of the wheels including the vacuum tire pads is still kept at an amazing 1326g (weights are measured manually, slight errors are normal)

Aerodynamic rim upgrade
More aerodynamic wheel design for improved side wind stability and sail effect on the windward side


Six-spoke super stiffness
Wheels provide unrivaled pedaling rigidity, converting every kick into forward momentum. Lateral stiffness is superior to steel bar wheels, providing greater, more direct stiffness during cornering

Hooked Wheels
Hooked wheels are more applicable than traditional non-hooked lightweight rims, you can choose vacuum tire or inner tire system, and support higher tire pressure (vacuum tire follows the tire logo). Recommended 28C outer tires

36 planetary ratchet hub
Combined with the large flange and wider drive side design improves conduction efficiency and reduces power loss

Product real photo


After-sales:
1, normal use of the wheelset warranty of 2 years (excluding the bearing part)
2, such as impact, crash, man-made reasons for damage to the wheelset will provide paid after-sales
Special tips:
1, the wheelset use process, please set the tire pressure according to weight and use scenario reasonable [Refer to the outer tire marked tire pressure].
2,Tire installation process should try to avoid using steel pry bar, or its use of other tools that may damage the rim to install tires.
3,Riding process encounter sharp or right angle steps, potholes should be slowed down to release force through, otherwise it may lead to wear tire damage wheelset.
4,The wheelset should be cleaned, serviced and maintained regularly during the use of the wheelset to maintain the normal use and safety of the wheelset.
5,Do not exceed the wheelset strength tolerance range. ,Do not exceed the wheelset strength tolerance range.
Share
